DIY: Trail Camera Lens Hacking
This post gives an overview of potential lens replacements for Browning Trail Cameras.
Continue reading →Tag Archives: Browning
New Optional Features for Browning HP5 Trail Cameras
In a recent post, I introduced firmware with new features for Browning HP5 model trail cameras. This new version adds several more features — each selectable by additions to the camera’s setup menu. These features include date and time format … Continue reading →
Internal and External Trail Camera Power
Many trail cameras support both internal batteries as well as an external power supply. When there is only one power source, it’s clear where the power comes from. But what does the camera do when both internal and external power is available? If you use rechargeable batteries inside the camera, and a set of primary batteries in an external pack, which set will the camera use first?
Continue reading →Deep Tech: Will Long Night Videos Damage the Browning Elite HP5 Trail Cameras?
I recently released firmware for Browning Elite HP5 cameras that bypasses a limit of 20 seconds on the length of night time videos. Several folks have asked: “Is this a safe thing to do, isn’t the limit there for a reason?” … Continue reading →
Adding Features to Browning Elite HP5 Firmware
The Browning Elite HP5 series trail cameras have a rich set of features. But, like all computer firmware, it’s not perfect. Based on some Facebook feedback, and our own experience, I identified several small additions of interest to the camera … Continue reading →
Deep Tech: Trail Camera Detection Zones
Knowing the detection zone pattern can help produce more “true triggers” and fewer “false triggers.” In an earlier post Deep Tech: Trail Camera PIR Sensors I covered some of the details of PIR sensors. Based on feedback from subscribers, though, I realized that I had missed some subtle aspects of the Fresnel lens optics and detection zones for PIR sensors. In this post, I look more closely at trail camera detection zones, and how they work. I also give a straightforward way to find the detection zones in most cameras. I use this method to measure the detection zones for three camera models.
Continue reading →Browning Spec Ops Elite HP5 Teardown
Teardown of Browning Spec Ops Elite HP5 (BTC-8E-HP5). The PIR sensor “blinders” are gone and there’s a new lens configuration.
Continue reading →Using Trail Camera to Trigger a DSLR Camera
One of the challenges facing the homebrew DSLR camera trapper is finding a good trigger sensor. In this post, I describe a system for using a commercial trail camera to trigger a DSLR camera.
Continue reading →IR to White Flash Trail Camera Conversion
Steps for converting a trail camera with an IR flash to a white flash for color night time photos and videos
Continue reading →Trail Camera Noise: Part 2 — Ultrasonic Squeals
Animals are sometimes startled by trail cameras as the cameras are taking photos and videos. Camera noise seems a likely culprit, especially in daytime captures, without the flash. In Part 1 of this two part series, I listened carefully to … Continue reading →